Disconnect the powercable.
|
Make sure the computer is disconnected, then... |
... open the chassie, and ... |
.. mount the new graphics adapter, make sure that you are discharged before handling the board. |
Make sure that the board is securely seated. |
Make sure that your powersupply can supply the boards power requirements properly, noname brand powersupplys usually provide 30% less efficiency than stated. |
Connect the 6-pin PCI-express powerconnector. |
Use the correct powerconnector, 6-pin pci-express, do not use the powerconnector for the mainboard. |
Should you need to use the included Y-molex -> Pci-express power connector ... |
... make sure that you connect the Y-cable to two individual powerleads from the powersupply.
|
Connect your displaycable (DVI)
|
Should you require an VGA-output for your display, use the included DVI-VGA converter. |
